Ask about discounts on bulk orders
1 LEFT
1 LEFT
* Aluminium/Magnesium Construction
* Accepts Full Sized 8 inch Laps
* Light-Weight and Portable
* Large See-thru Acrylic Drip Tank
* Bright 100 Watt Flexible Lamp
* Accurate Readings to 1/10 Degree
* 220 Volt Also in 110 Volt Export Models
* Fully wired and Ready to Run
Includes : Standard Dop Set, Transfer Fixture, Instruction Book, and all necessary tools.
2 LEFT
These types of machines have a unique tumbling action which is both fast and gentle - faster than a rotary tumbler but very gentle so that items can be polished without changing the shape.
The MT-4 has NO moving parts (shafts, belts, pulleys, eccentric weights or drive motors) so that service life is far longer than other types of tumblers.Electrical power is used to generate more than 3,500 vibrations per minute within the hopper.This model features an electronic controller to adjust the rotation and intensity of the tumbler operation and has a 4lb or about 1.75kg load capacity.
2 LEFT
You control the tumbling action with a Mini Sonic Tumbler, from the gentle processing of opal to the full power processing of agates, jaspers, topaz, etc. Tumble polish baroques, preforms, beads, sea shells, metals, etc., fast and efficiently and without changing the shapes to any measurable degree. You can even tumble poilish carvings without wearing away delicate features.
The MT-10 features dial speed controls for selecting the power required to control tumbling action and speed of rotation. The MT-10 is UL listed and has automatic thermal overload protection.
The patented action of the MT-10 tumbler is achieved without shafts, belts, pulleys, eccentric weights, or even a motor. Without any moving parts to wear out or a motor to burn up, these tumblers will outlast any other vibratory type tumbler.
Hoppers are of cast polyvinyl and the tumbler housing is made of durable ABS plastic. You get quality materials and workmanship in the MT-10.
**NOTE: You do not necessarily have to limit the number of hoppers you select. Having extra hoppers, especially for the polishing stage, is recommended to prevent contamination.
Rugged heavy duty motor, sealed ball bearings, continuous rated for use in production shops.
Runs at 2,800RPM on 1hp. Arbor size: 5/8". Supplied with two threaded tapered spindles. Suitable for wheels or buffs up to 8" diameter.
5 LEFT
Large capacity, heavy duty tumbler. Recommended for small to mid-level production. Tumble finish with all types of media, except steel shot. May be run wet or dry. Use the flow through (FT) method to keep parts bright and clean. With alumnium bowls and vinyl lids, this tumbler caters for everyone from the hobbyist to the commercial producer. The tumblers come in five sizes. Bowls set on 12-14 springs.
Bowl Sizes: 16"- $1090 : 18"- $1219.40 : 20"- $1642.40
2 LEFT
5lb mini electrically powered tumbler. Ideal for medium sized stones, which are too large for the smaller tumbler models. Polyethylene bowl set on 4 springs. 1/30 HP sealed bearing motor. Powerful 220V 60Hz Direct Drive Motor. No-Slip Rubber Feet For Stability. Rustproof Polyethylene Drum & Securely Sealed Lid. Easy Access On/Off Rocker Switch. Drum Opening: 7-3/4" Diameter. Rubber Protection Guard For Springs & Rubber O-Ring Seal. Great For rocks, nuts, bolts, other metal parts, coins, glass, jewellery & more Includes Complete Instructions & Owners Manual
5 LEFT
Cylinder Mode
For faceting and engraving metal. Comes with set of dies ranging in size from 145mm to 670mm in diameter, set-up tools, master lap, and 1/3 h.p motor. Hammer tone paint finish. Solid steel construction. Wired to Australian Standards and electrically tested in Australia.
Personalise rings, bracelets, necklaces, pendants, earrings, cufflinks and tie clips with this versatile piece of equipment.1 LEFT
Basic Model
For faceting and engraving metal. Comes with set of dies ranging in size from 145mm to 670mm in diameter, set-up tools, master lap, and 1/4 h.p motor. Hammer tone paint finish. Solid steel construction. Wired to Australian Standards and electrically tested in Australia.
Personalise rings, bracelets, necklaces, pendants, earrings, cufflinks and tie clips with this versatile piece of equipment.
1 LEFT
Multi-Functional Model
For faceting and engraving metal. Comes with set of dies ranging in size from 145mm to 670mm in diameter, set-up tools, master lap, and 1/3 h.p motor. Hammer tone paint finish. Solid steel construction. Wired to Australian Standards and electrically tested in Australia.
1 LEFT
1 LEFT
2 LEFT
Motor no incl.
ONLY
1
LEFT
The 0085 is a 9KW kiln. It can keep 24 steel flasks of 4" x 9 " at one time. Inner dimension of the chamber is 520 x 280 x 420mm.
Please call Gemworld on (07) 3865 4420 for more information.
ONLY
1
LEFT
The 0086 is a 6KW kiln. It can keep 12 steel flasks of 4" x 9" at one time. Inner dimension of the chamber is 440 x 280 x 420mm.
Please call Gemworld on (07) 3865 4420 for more information.
ONLY
1
LEFT
The 0087 is a 5KW kiln. Inner dimension of the chamber is 390 x 390 x 390mm.
Please call Gemworld on (07) 3865 4420 for more information.
ONLY
1
LEFT
Excellent board for designing your beading for necklaces and bracelets. Enables you to plan your design and make changes as many times as you need before you start stringing. The flocked covering on the board stops your beads from escaping while in the planning stages.
The 2-speed motor permits grinding and sanding at high speed for fast results and polishing at low speed for better polished surfaces. The in-line setup of the six wheels make cabbing quick and efficient. There is no need for you to move to the side of the machine, allowing you to work without interuption. Wheels are supported on both sides of the shaft, minimizing the problem of unbalanced extended shafts.
Complete with wheels
Saw, Grind, Sand and Polish on this all-in-one cabbing and glass restoration machine. This sturdy unit is made from a high quality, cast, aluminium-magnesium base to provide years of dependable use. The most versatile cabbing machine on the market, this unit offers clean operation (no plumbing required), a compact size; only 27cm x 50cm of space required and it weighs only 14kg. The powerful two speed motor. Includes various accessories including a 6 x .102 diamond blade, 100 grit silicon carbide grinding wheel, a 220 grit and 600 grit silicon carbide wet sanding discs, cerium oxide polish, polishing pad, backing discs as well as dop sticks and dop wax.
Maximum thickness of cut: 2"
Throat: 16"
Blade length: 5" (pin type)
Cuts per minute: 1330 (50Hz)
Storke: 3/4"
Table size: 14-3/4" x 7-7/8"
As is. New item but is an older model.
No box.
Dri-Polisher Lid Only.
Raytech's heavy polyethylene lids are easily and quickly removed for cleaning. Made in the USA.
Colour: Orange only
Lortone 8" Arbor for four wheels - BA84
on the machines page