Carbon (Charcoal) Block ** OUT OF STOCK **
This is the world’s best charcoal, made of hardwood with great life and durability. This is not a soft charcoal so it will last three to five times as long. It also has better heat retention, giving the user the desired reflective heat to solder faster and easier with better flow. Our premium blocks are wrapped in PVC, then individually boxed, eliminating the mess often associated with charcoal. Measures: 5 1/2" x 2 3/4" x 1 1/4".
$32.70
CARBBLK
Soldering tools and accessories prices are subject to change
Ceramic Honeycomb Block
Ceramic Honeycomb Block. Holds retaining pins to keep work in place when soldering. Lightweight and reflects heat. Size: 3-7/8" x 5-5/16". These blocks protect your table When soldering and provide a permanent flat surface with very low loss of heat. An an ideal surface for soldering gold or silver jewellery, this block with its thousands of holes that reduce heat-up time and reflect heat back to the soldered object will not erode and will hold binding wire.
$22.45
CERABLK
Soldering tools and accessories prices are subject to change
Soldering Board - 6" x 6" ** OUT OF STOCK **
New Silquar material is used in our non-asbestos boards. Silquar retains heat during soldering and can be easily cleaned with water. Takes heat up to 2200°F.
$28.80
SOLDBOARD
Soldering tools and accessories prices are subject to change
Silver Flux - Tenacity ** OUT OF STOCK **
Silver Flux - Tenacity.
$14.40
FLUXSILGP
Soldering tools and accessories prices are subject to change
Silver Flux - Easy-Flow
 Easy-flo™ Flux Paste a brazing flux suitable for use with silver brazing filler metals. It has a working range of 575-825ºC and can be used with silver brazing filler metals melting below 775°C (such as several of the Silver-flo™, Easy-flo™ and Argo-braze™ alloys).
Easy-flo™ Flux Paste exhibits better life at temperature and greater overheat resistance than many other flux pastes. Easy-flo™ Flux paste has a low melt viscosity and as such performs well when pasted onto vertical surfaces, and can be useful when brazing stainless steel. The molten viscosity of Easy-flo™ Flux Paste is such that it holds on vertical surfaces. It is therefore particularly useful when brazing joints in positions where other fluxes may have a tendency to run away from the joint.
Product uses: This product is suitable for use on all the common engineering materials, (copper, brass, mild steel and stainless steel), but not aluminium. Special purpose fluxes are required when brazing aluminium bronze, certain grades of stainless steel, tungsten, molybdenum and tungsten carbide or where protracted heating is involved. $29.50
FLUXSILEF
Soldering tools and accessories prices are subject to change
Soldering Third Hand
Soldering station with two fully adjustable spring loaded third hands, comes with small allen key to remove, replace or tighten hands. Hands move and stay in any direction you need. It has a 6"x 6" (150mm) square Heat resistant material soldering board which sits on a 9 x 6 inch metal plate to protect bench or table. It sits stable on a bench or table. Includes 6" x 6" grey transit board for high heat tolerance. Weight: 1kg.
$59.50
SOLDTH
Soldering tools and accessories prices are subject to change
Ingot Mould
Ingot Mould. Used to convert scrap into suitable shape for rolling
$13.95
INGOTMOULD
Soldering tools and accessories prices are subject to change
Titanium soldering pick (Blue)
Titanium soldering pick with Hex handle, The colors designed keep you from cross contaminating specific karats
$8.46
SOLDP-B
Soldering tools and accessories prices are subject to change
Titanium soldering pick (Red)
Titanium soldering pick with Hex handle, The colors designed keep you from cross contaminating specific karats
$8.46
SOLDP-G
Soldering tools and accessories prices are subject to change
Titanium soldering pick (Yellow)
Titanium soldering pick with Hex handle, The colors designed keep you from cross contaminating specific karats
$8.46
SOLDP-R
Soldering tools and accessories prices are subject to change
Doming Block - Brass Small
Doming Block- Brass. Small. Size: 1"
Suitable for jewellery making and shaping small items, or turn metal disks into spheres, make round indentations in your book covers, and give your dolls anatomical form. This quality solid brass machined block with 17 holes is used for doming sheet into a cup shape. The cups should be kept clean and polished as any marks will be impressed onto the metal's surface. Can be used with Gemworld's doming punches. $42.00
DOMEBRS
Soldering tools and accessories prices are subject to change
Doming Block - Brass med
Doming Block - Brass. Med. Size: 1-1/2"
Suitable for jewellery making and shaping small items, or turn metal disks into spheres, make round indentations in your book covers, and give your dolls anatomical form. This quality solid brass machined block with 17 holes is used for doming sheet into a cup shape. The cups should be kept clean and polished as any marks will be impressed onto the metal's surface. Can be used with Gemworld's doming punches.
$39.95
DOMEBLKBR1
Soldering tools and accessories prices are subject to change
Doming Block - Steel Large
Doming Block- Steel. Large. Size: 2-1/2"
This steel doming block has 17 holes, and is used for doming sheet into a cup shape. The cups should be kept clean and polished as any marks will be impressed onto the metal's surface.
$65.95
DOMEBLKST
Soldering tools and accessories prices are subject to change
Doming Punches - set of 12
Doming Punches - Used in metalsmithing for forming shapes and curves. Normally used with dapping dies and blocks. Finely finished points give clean results. These are an indispensable bench tool and are for the smaller indentations in Gemworld's dapping block. NB. The punches should be kept clean and polished as any marks will be impressed onto the surface of the metal.
Set of 12. Finely finished and includes stand.
Sizes: 7/16", 1/8", 9/16", 3/32", 7/32", 1/4", 9/32", 5/16", 3/8", 13/32". $28.00
DOMEPNCH
Soldering tools and accessories prices are subject to change
Tripod and Mesh
Made from metal. Supplied flat packed, 3 legs screw into a circular
support on which rests the steel gauze (approx.15x15cm). Used to heat materials for soldering. Set tripod over a Spirit Lamp or bunson burner. Includes mesh.
Replacement Mesh $4.25
Code: TRIPMESH
$21.10
TRIPSTAND
Soldering tools and accessories prices are subject to change
Spirit Lamp
Made from heavy duty glass with a metal screw top which supports a wick and snuff cap. Designd to not tip or fall. Used much in the same way as an oil lamp. The glass chamber is filled with methylated spirit, the wick soaks the spirit, is lit and has a flame for as long as there is spirit in the lamp. An alcohol lamp is also a safe way to dop your stones with wax. If you use adhesives for dopping, the alcohol lamp is handy for heating up the dop to easily remove your stones. Spare Wicks available $14.95
SPIRL3
Soldering tools and accessories prices are subject to change
Replacement Wick for Spirit Lamp
Replacement Wick for Spirit Lamp.
$1.95
SARWICK
Soldering tools and accessories prices are subject to change
Burnisher - Curved
Burnisher - Curved. Hardened steel tool used for finishing and smoothing edges on soft metal. This burnisher has a wooden handle, is tapered and curves upwards at the end. The curved burnisher is oval in cross-section & made from a hard polished metal. Used to burnish (polish) a surface unsuitable for polishing with a mop.
$6.95 BURNCVD
Soldering tools and accessories prices are subject to change
Burnisher - Straight
Burnisher- Straight. Hardened steel tool used for finishing and smoothing edges on soft metal. This burnisher has a wooden handle, is tapered and curves upwards at the end. The curved burnisher is oval in cross-section & made from a hard polished metal. Used to burnish (polish) a surface unsuitable for polishing with a mop.
$6.95
BURNSTR
Soldering tools and accessories prices are subject to change
Mixing Bowl - 4"
Made in flexible long lasting rubber. Ideal to use for mixing investment powder. Easy clean-up, just flex and wipe.
$5.50
-
Soldering tools and accessories prices are subject to change
Curved "SS" Stamp
A steel hand stamp used to indicate sterling silver. Must be struck by a hammer. Hallmarking Punch SS.
This stamp works on metals such as brass, bronze, silver, gold, platinum, stainless, aluminum, and most plastics too
$4.95
-
Soldering tools and accessories prices are subject to change
Curved "14ct" Stamp
A steel hand stamp used to indicate 14ct gold. Must be struck by a hammer. Hallmarking Punch 14 Carats
This stamp works on metals such as brass, bronze, silver, gold, platinum, stainless, aluminum, and most plastics too
$6.95
-
Soldering tools and accessories prices are subject to change
Anchor Soldering Wire
An economical way to learn the basics of soldering. Made from iron and used in soldering to aid in the support of joining two pieces of metal.
$3.30
-
Soldering tools and accessories prices are subject to change
Anchor Soldering Flux Paste
The function of a soldering flux is to remove oxidation from the members being joined and to prevent further oxidation during soldering.
$3.95
-
Soldering tools and accessories prices are subject to change
Magnesia Block ** OUT OF STOCK **
This brick is made out of a magnesium compound used in the solder process to absorb heat from a torch.
This lightweight, non-asbestos fireproof material is fibrous so it is soft enough that one can pin objects on the surface for perfect soldering. Size is 6" x 3" x 2" (150 x 78 x 50mm). Wt. 4 oz.
$28.20
MAGBLK
Soldering tools and accessories prices are subject to change
Crucible & Flask Tong Holder
The tongs are made of a heavy material.The finger grips are roomy to facilitate handling.
$9.65
-
Soldering tools and accessories prices are subject to change
Soldering Tweezer - Bent
These stainless steel tweezers have multi-uses for jewellers, beaders and watchmakers but are actually especially designed for soldering. Insulating fibre grips on eaither side prevent the tweezers from heating up, so they will not burn your hands. The downward pointing tip makes picking up small objects easier.
$1.75
TWEZSOLB
Soldering tools and accessories prices are subject to change
Soldering Tweezer - Straight
These stainless steel tweezers have multi-uses for jewellers, beaders and watchmakers but are actually especially designed for soldering. Insulating fibre grips on eaither side prevent the tweezers from heating up, so they will not burn your hands.
$1.75
TWEZSOLS
Soldering tools and accessories prices are subject to change
Rolling Mill
Rolling Mill with 7 rolls of size 3" x 1-5/8". Supplied with the following high quality SS gears and wheels: 2 plain, 2 wire, 1 "V" shape, half round and 2 fancy rolls. Weight: 28kg for the set.
Rolling Mill with 7 rolls $490.00
Rolling mill with 5 rolls $402.00
$402.50
ROLLM-L
Soldering tools and accessories prices are subject to change
Flame Pot Aluminium Black
$4.38
---
Soldering tools and accessories prices are subject to change
Probe - set of three
Coming Soon
$3.85
---
Soldering tools and accessories prices are subject to change
Wooden dapping /forming block
Coming Soon
$20.15
---
Soldering tools and accessories prices are subject to change
Flame Pot Aluminium Black
Coming Soon
$6.60
---
Soldering tools and accessories prices are subject to change
Flux Dispenser Plastic.
2oz capacity
$2.63
---
Soldering tools and accessories prices are subject to change
Ceramic Rod with Holder on Base
$28.00
---
Soldering tools and accessories prices are subject to change
6"x6" Cordiorite Soldering Board
(Asbestos free)
$21.00
---
Soldering tools and accessories prices are subject to change
|
