Filing Block and Clamp
Filing Block and Clamp. Wooden filing block with clamp attachment to mount to a bench or table. Especially handy for aligning work. The screw clamp fits onto benches up to 2-1/8" thick.
$10.95
FILEBLCL
Lapidary, Bench & Jewellery tool prices subject to change
Eurotool Economy Diamond - 6 File Set ** OUT OF STOCK **
Diamond File Set - Eurotool. Set of six 16cm files. Includes pillar, half round, 4/4 square, round and barrette.
Exceptional quality for outstanding value. Available in cuts 0 (fine) and 2 (coarse)
in 5 1/2" (140mm) length. Handy sets. Count on these files for the highest and
most consistent quality of files in this price range.
Carefully tapered and uniformly cut.
$12.40
FILEEURO6
Lapidary, Bench & Jewellery tool prices subject to change
Eurotool Economy Diamond - 12 File Set ** OUT OF STOCK **
Diamond File Set - Eurotool. Set of Twelve 16cm files. Includes pillar, half round, 4/4 square, round and barrette.
Exceptional quality for outstanding value. Available in cuts 0 (fine) and 2 (coarse)
in 5 1/2" (140mm) length. Handy sets. Count on these files for the highest and
most consistent quality of files in this price range.
Carefully tapered and uniformly cut.
$21.60
FILEEURO12
Lapidary, Bench & Jewellery tool prices subject to change
Anchor Economy Files- 6 File Set
Needle Files - Economy. Set of six 14cm files. Good value.
This jeweller needle file set is made of fine steel. Ideal for preliminary filing, smoothing and shaping. Best used with a needle file holder. See Graver tools.
$9.95
FILES6
Lapidary, Bench & Jewellery tool prices subject to change
Anchor Economy Files- 12 File Set
Needle Files - Economy. Set of twelve 14cm files. Good value.
This jeweller needle file set is made of fine steel. Ideal for preliminary filing, smoothing and shaping. Best used with a needle file holder. See Graver tools
$14.95
FILES12
Lapidary, Bench & Jewellery tool prices subject to change
Riffler Files
Riffler Files - Set of Twelve. Length: 14cm. Includes plastic wallet.
With an assortment of cross sectional shapes and profiles, this economical starter set of Riffler Files can be used in hard to reach, or unusually shaped areas.
$36.50
FILESRIFS12
Lapidary, Bench & Jewellery tool prices subject to change
Wax Files - set of 6
Wax Files - set of 6. Length: 14cm.
Vinyl wrap case included.
"Rasp" type wax files.
$10.95
FILEWAXS6
Lapidary, Bench & Jewellery tool prices subject to change
Hand Vice - 3"
Hand Vice - 3".
$8.95
VICEHAND3
Lapidary, Bench & Jewellery tool prices subject to change
>
Hand Vice - 4"
Hand Vice - 4".
$9.95
VICEHAND4
Lapidary, Bench & Jewellery tool prices subject to change
Hand Vice - 5"
Hand Vice - 5".
$10.95
VICEHAND5
Lapidary, Bench & Jewellery tool prices subject to change
Bench Vice - 1-1/4"
Bench Vice - 1-1/4". Table mount vice.
$26.95 VICEBENCHC114
Lapidary, Bench & Jewellery tool prices subject to change
Bench Vice - 1-1/2"
Bench Vice- 1-1/2". Table mount vice.
$27.95
VICEBENCHC112
Lapidary, Bench & Jewellery tool prices subject to change
Pin Vice/Tongs
Made from a hard wearing metal this finger held vice holds small items such as screws, drill bits, tools, knife blades and wire. Each end houses a double ended collet, each of which is a different size. To operate: Unscrew the chuck (on either end) select the desired collet and insert the tool. Tighten the chuck to hold the tool securely.
$3.33
PINVICEDOUBL
Lapidary, Bench & Jewellery tool prices subject to change
Swivel Pin Vice
Swivel Pin Vice. Single ended pin vice for holding small tools. Two reversible collets and a hexagonal swivel top for easy handling. The hex head prevents the tool from rolling on your bench.
$8.95
PINVICESWIV
Lapidary, Bench & Jewellery tool prices subject to change
Pin Vice for Graver Tools (Graver Chuck)
Pin Vice for Graver Tools (Graver Chuck). Nickel plated with wooden handle.
$4.55
PINVICEGRAV
Lapidary, Bench & Jewellery tool prices subject to change
Clamp Vice - 1-1/4"
Clamp Vice- 1-1/4". Table vice with clamp for jewellers, beaders and watchmakers.
$26.95
VICECLM114
Lapidary, Bench & Jewellery tool prices subject to change
Clamp Vice- 1-1/2"
Clamp Vice- 1-1/2". Table vice with clamp for jewellers, beaders and watchmakers.
$27.95
VICECLM112
Lapidary, Bench & Jewellery tool prices subject to change
Third Hand - with alligator clips
Third Hand- Double. Allows for hands-free work when soldering or beading.
$24.50
THIRDHAND
Lapidary, Bench & Jewellery tool prices subject to change
Bench Pin and Anvil
Bench Pin and Anvil. For supporting work being sawn, filed etc. Flat top for hammering and flattening pieces.
$22.75
BENCHPINANV
Lapidary, Bench & Jewellery tool prices subject to change
Bench pin with metal holder
Bench Pin Wood and Bracket. Bench pin with metal holder. Used when a hole for a bench pin is not provided in the bench. Thumb screws allow easy replacement of pin.
$13.50
BENCHPINBRAC
Lapidary, Bench & Jewellery tool prices subject to change
Anvil - High
Anvil - High. Round base. Used as a base for staking, punching, drilling and rivetting small parts.
Tip: Surfaces should be kept clean and polished - any marks will impress on the surface of the metal.
$39.95
ANVLH
Lapidary, Bench & Jewellery tool prices subject to change
Anvil - Low
Anvil - Low. Used for flattening and shaping. Has one round horn and one flat horn.
The perfect surface for repairing, forming, shaping, flattening or bending of work pieces. Has round and flat horns and a hole in the top for riviting. The working surface is made from hardened steel which has been chromed and polished. Tip: Surfaces should be kept clean and polished - any marks will impress on the surface of the metal.
$39.95
ANVLL
Lapidary, Bench & Jewellery tool prices subject to change
Graver Handle
Graver Handle. Wooden handle with metal collar for added strength. Shaped to fit comfortably in hand. Used to hold Graver tools.
$1.40
GRAVHNDL
Lapidary, Bench & Jewellery tool prices subject to change
Graver Knife and Chisel
Graver Knife and Chisel. Used for engraving and etching. Fits in Graver handle.
$2.45
GRAVKN
Lapidary, Bench & Jewellery tool prices subject to change
Graver Square and Chisel
Graver Square and diamond shape. Used for engraving and etching. Fits in Graver handle.
$2.45
GRAVSQ
Lapidary, Bench & Jewellery tool prices subject to change
Prong Pusher
Prong Pusher. Square ended prong pusher for setting and unsetting prongs and claws allowing removal of stones.
Made from a soft metal to help prevent damage, with a comfortable wooden handle.
$2.99
PRONGPUSH
Lapidary, Bench & Jewellery tool prices subject to change
Bezel Pusher
Bezel Pusher. Square ended prong pusher for setting and unsetting prongs and claws allowing removal of stones.
A pusher with a grooved end and and a wooden handle. Made from a soft metal to help prevent damage
$2.99
BEZLPSH
Lapidary, Bench & Jewellery tool prices subject to change
Bezel Roller
Bezel Roller. Rolls and pushes bezels against stone in rings and brooches. Recommended for larger settings.
Bezel rollers are extremely simple tools but very important for setting stones in bezels. Made from a soft metal to help prevent damage. Wooden handle.
$2.99
BEZLRLL
Lapidary, Bench & Jewellery tool prices subject to change
Burnisher - Curved
Oval shaped blades in a highly polished steel and set in a wooden handle. Ideal for finishing and rubbing over silver pieces to bring to a shine..
$6.95
BURNCVD
Lapidary, Bench & Jewellery tool prices subject to change
Burnisher - Straight
Burnisher- Straight. Hardened steel tool used for finishing and smoothing edges on soft metal.
$6.95
BURNSTR
Lapidary, Bench & Jewellery tool prices subject to change
Wire Brush
Durable and long plastic handle. Ideal for removing debris and polishing welds.
$1.75
WIREBRUS
Lapidary, Bench & Jewellery tool prices subject to change
Diamond Poger - Set of 12
In a plastic box. Includes No's 1-12. Used to form beads that hold diamonds.
$21.00
DIAPOG
Lapidary, Bench & Jewellery tool prices subject to change
Beading Needle
Needle with wooden handle.
$2.95
BEADN
Lapidary, Bench & Jewellery tool prices subject to change
Micro ScrewDrivers - set of 3
An economical set of micro screw drivers. Contains "Phillips Head" sizes: 2.5 x 75mm, 3.0 x 100mm and 4.0 x 150mm.
** SPECIAL PRICE **
$0.50
MICROSD
Lapidary, Bench & Jewellery tool prices subject to change
Pearl Drilling Vice
A simple yet handy tool to hold pearls & beads in place whilst drilling.
$14.00
----
Lapidary, Bench & Jewellery tool prices subject to change
Agate Burnisher 8"
$11.38
----
Lapidary, Bench & Jewellery tool prices subject to change
Hand Vice
$22.75
----
Lapidary, Bench & Jewellery tool prices subject to change
Hole Maker for 1.6mm and 2.3mm holes
$10.50
----
Lapidary, Bench & Jewellery tool prices subject to change
Rubber Dapping Block
$12.25
----
Lapidary, Bench & Jewellery tool prices subject to change
Jump Ring Maker
4-6-7-8mm - $17.50
10-12-14-18mm - $21
See Body
----
Lapidary, Bench & Jewellery tool prices subject to change
Punch for Automatic centering
$10.50
----
Lapidary, Bench & Jewellery tool prices subject to change
7.5" Twisted Scriber with Carbide Tips
$4.38
----
Lapidary, Bench & Jewellery tool prices subject to change
150mm Scriber with Carbide Tip
$6.13
----
Lapidary, Bench & Jewellery tool prices subject to change
Wonder ring Stretcher with 8 Pair Dies
$52.50
----
Lapidary, Bench & Jewellery tool prices subject to change
|
