Burrs - Round Ball. Diamond Plated Stainless Steel. Size 2.5mm.
These small cutters have diamond abrasive plated onto a stainless steel 3/32" diameter shaft. The recommended speeds are 10,000 rpm for the cutting off wheels, 15,000 rpm for the larger burrs and up to 25,000 rpm for the smaller burrs. Use with water. Shank diameter- 2.34mm. total length- 45mm.Perfect for carving, grinding and engraving work on mild and hardened metals & alloys, precious metals, gemstones, glass, plastics and ceramics. Used in conjunction with a pendant drill, hobby drill, rotary tool or micromotor to cut or grind away, shape or give pattern to a surface.
Burrs - Round Ball. Diamond Plated Stainless Steel. Size 2.7mm.
These small cutters have diamond abrasive plated onto a stainless steel 3/32" diameter shaft. The recommended speeds are 10,000 rpm for the cutting off wheels, 15,000 rpm for the larger burrs and up to 25,000 rpm for the smaller burrs. Use with water. Shank diameter- 2.34mm. total length- 45mm.Perfect for carving, grinding and engraving work on mild and hardened metals & alloys, precious metals, gemstones, glass, plastics and ceramics. Used in conjunction with a pendant drill, hobby drill, rotary tool or micromotor to cut or grind away, shape or give pattern to a surface.
Burrs - Round Ball. Diamond Plated Stainless Steel. Size 4mm.
These small cutters have diamond abrasive plated onto a stainless steel 3/32" diameter shaft. The recommended speeds are 10,000 rpm for the cutting off wheels, 15,000 rpm for the larger burrs and up to 25,000 rpm for the smaller burrs. Use with water. Shank diameter- 2.34mm. total length- 45mm.Perfect for carving, grinding and engraving work on mild and hardened metals & alloys, precious metals, gemstones, glass, plastics and ceramics. Used in conjunction with a pendant drill, hobby drill, rotary tool or micromotor to cut or grind away, shape or give pattern to a surface.
Burrs - Round Ball. Diamond Plated Stainless Steel. Size 4.7mm.
These small cutters have diamond abrasive plated onto a stainless steel 3/32" diameter shaft. The recommended speeds are 10,000 rpm for the cutting off wheels, 15,000 rpm for the larger burrs and up to 25,000 rpm for the smaller burrs. Use with water. Shank diameter- 2.34mm. total length- 45mm.Perfect for carving, grinding and engraving work on mild and hardened metals & alloys, precious metals, gemstones, glass, plastics and ceramics. Used in conjunction with a pendant drill, hobby drill, rotary tool or micromotor to cut or grind away, shape or give pattern to a surface.
Burrs - Cone. Diamond Plated Stainless Steel. Size 1.7mm.
These small cutters have diamond abrasive plated onto a stainless steel 3/32" diameter shaft. The recommended speeds are 10,000 rpm for the cutting off wheels, 15,000 rpm for the larger burrs and up to 25,000 rpm for the smaller burrs. Use with water. Shank diameter- 2.34mm. total length- 45mm.Perfect for carving, grinding and engraving work on mild and hardened metals & alloys, precious metals, gemstones, glass, plastics and ceramics. Used in conjunction with a pendant drill, hobby drill, rotary tool or micromotor to cut or grind away, shape or give pattern to a surface.
Burrs - Cone. Diamond Plated Stainless Steel. Size 1.5mm.
These small cutters have diamond abrasive plated onto a stainless steel 3/32" diameter shaft. The recommended speeds are 10,000 rpm for the cutting off wheels, 15,000 rpm for the larger burrs and up to 25,000 rpm for the smaller burrs. Use with water. Shank diameter- 2.34mm. total length- 45mm.Perfect for carving, grinding and engraving work on mild and hardened metals & alloys, precious metals, gemstones, glass, plastics and ceramics. Used in conjunction with a pendant drill, hobby drill, rotary tool or micromotor to cut or grind away, shape or give pattern to a surface.
Burrs - Cone. Diamond Plated Stainless Steel. Size 1.00mm.
These small cutters have diamond abrasive plated onto a stainless steel 3/32" diameter shaft. The recommended speeds are 10,000 rpm for the cutting off wheels, 15,000 rpm for the larger burrs and up to 25,000 rpm for the smaller burrs. Use with water. Shank diameter- 2.34mm. total length- 45mm.Perfect for carving, grinding and engraving work on mild and hardened metals & alloys, precious metals, gemstones, glass, plastics and ceramics. Used in conjunction with a pendant drill, hobby drill, rotary tool or micromotor to cut or grind away, shape or give pattern to a surface.
Burrs - Tapered Cylinder. Diamond Plated Stainless Steel. Size 2.00mm.
These small cutters have diamond abrasive plated onto a stainless steel 3/32" diameter shaft. The recommended speeds are 10,000 rpm for the cutting off wheels, 15,000 rpm for the larger burrs and up to 25,000 rpm for the smaller burrs. Use with water. Shank diameter- 2.34mm. total length- 45mm.Perfect for carving, grinding and engraving work on mild and hardened metals & alloys, precious metals, gemstones, glass, plastics and ceramics. Used in conjunction with a pendant drill, hobby drill, rotary tool or micromotor to cut or grind away, shape or give pattern to a surface.
Burrs - Tapered Cylinder. Diamond Plated Stainless Steel. Size 2.70mm.
These small cutters have diamond abrasive plated onto a stainless steel 3/32" diameter shaft. The recommended speeds are 10,000 rpm for the cutting off wheels, 15,000 rpm for the larger burrs and up to 25,000 rpm for the smaller burrs. Use with water. Shank diameter- 2.34mm. total length- 45mm.Perfect for carving, grinding and engraving work on mild and hardened metals & alloys, precious metals, gemstones, glass, plastics and ceramics. Used in conjunction with a pendant drill, hobby drill, rotary tool or micromotor to cut or grind away, shape or give pattern to a surface.
Burrs - Tapered Cylinder. Diamond Plated Stainless Steel. Size 6.50mm.
These small cutters have diamond abrasive plated onto a stainless steel 3/32" diameter shaft. The recommended speeds are 10,000 rpm for the cutting off wheels, 15,000 rpm for the larger burrs and up to 25,000 rpm for the smaller burrs. Use with water. Shank diameter- 2.34mm. total length- 45mm.Perfect for carving, grinding and engraving work on mild and hardened metals & alloys, precious metals, gemstones, glass, plastics and ceramics. Used in conjunction with a pendant drill, hobby drill, rotary tool or micromotor to cut or grind away, shape or give pattern to a surface.
Burrs - Round. Diamond Plated Stainless Steel. Size 2.20mm.
These small cutters have diamond abrasive plated onto a stainless steel 3/32" diameter shaft. The recommended speeds are 10,000 rpm for the cutting off wheels, 15,000 rpm for the larger burrs and up to 25,000 rpm for the smaller burrs. Use with water. Shank diameter- 2.34mm. total length- 45mm.Perfect for carving, grinding and engraving work on mild and hardened metals & alloys, precious metals, gemstones, glass, plastics and ceramics. Used in conjunction with a pendant drill, hobby drill, rotary tool or micromotor to cut or grind away, shape or give pattern to a surface.
Burrs - Round. Diamond Plated Stainless Steel. Size 2.70mm.
These small cutters have diamond abrasive plated onto a stainless steel 3/32" diameter shaft. The recommended speeds are 10,000 rpm for the cutting off wheels, 15,000 rpm for the larger burrs and up to 25,000 rpm for the smaller burrs. Use with water. Shank diameter- 2.34mm. total length- 45mm.Perfect for carving, grinding and engraving work on mild and hardened metals & alloys, precious metals, gemstones, glass, plastics and ceramics. Used in conjunction with a pendant drill, hobby drill, rotary tool or micromotor to cut or grind away, shape or give pattern to a surface.
Burrs - Round. Diamond Plated Stainless Steel. Size 3.70mm.
These small cutters have diamond abrasive plated onto a stainless steel 3/32" diameter shaft. The recommended speeds are 10,000 rpm for the cutting off wheels, 15,000 rpm for the larger burrs and up to 25,000 rpm for the smaller burrs. Use with water. Shank diameter- 2.34mm. total length- 45mm.Perfect for carving, grinding and engraving work on mild and hardened metals & alloys, precious metals, gemstones, glass, plastics and ceramics. Used in conjunction with a pendant drill, hobby drill, rotary tool or micromotor to cut or grind away, shape or give pattern to a surface.
Burrs - Round. Diamond Plated Stainless Steel. Size 5.70mm.
These small cutters have diamond abrasive plated onto a stainless steel 3/32" diameter shaft. The recommended speeds are 10,000 rpm for the cutting off wheels, 15,000 rpm for the larger burrs and up to 25,000 rpm for the smaller burrs. Use with water. Shank diameter- 2.34mm. total length- 45mm.Perfect for carving, grinding and engraving work on mild and hardened metals & alloys, precious metals, gemstones, glass, plastics and ceramics. Used in conjunction with a pendant drill, hobby drill, rotary tool or micromotor to cut or grind away, shape or give pattern to a surface.
Burrs - Round. Diamond Plated Stainless Steel. Size 8.70mm.
These small cutters have diamond abrasive plated onto a stainless steel 3/32" diameter shaft. The recommended speeds are 10,000 rpm for the cutting off wheels, 15,000 rpm for the larger burrs and up to 25,000 rpm for the smaller burrs. Use with water. Shank diameter- 2.34mm. total length- 45mm.Perfect for carving, grinding and engraving work on mild and hardened metals & alloys, precious metals, gemstones, glass, plastics and ceramics. Used in conjunction with a pendant drill, hobby drill, rotary tool or micromotor to cut or grind away, shape or give pattern to a surface.
Burrs - Flame. Diamond Plated Stainless Steel. Size 2.00mm.
These small cutters have diamond abrasive plated onto a stainless steel 3/32" diameter shaft. The recommended speeds are 10,000 rpm for the cutting off wheels, 15,000 rpm for the larger burrs and up to 25,000 rpm for the smaller burrs. Use with water. Shank diameter- 2.34mm. total length- 45mm.Perfect for carving, grinding and engraving work on mild and hardened metals & alloys, precious metals, gemstones, glass, plastics and ceramics. Used in conjunction with a pendant drill, hobby drill, rotary tool or micromotor to cut or grind away, shape or give pattern to a surface.
Burrs - Flame. Diamond Plated Stainless Steel. Size 2.70mm.
These small cutters have diamond abrasive plated onto a stainless steel 3/32" diameter shaft. The recommended speeds are 10,000 rpm for the cutting off wheels, 15,000 rpm for the larger burrs and up to 25,000 rpm for the smaller burrs. Use with water. Shank diameter- 2.34mm. total length- 45mm.Perfect for carving, grinding and engraving work on mild and hardened metals & alloys, precious metals, gemstones, glass, plastics and ceramics. Used in conjunction with a pendant drill, hobby drill, rotary tool or micromotor to cut or grind away, shape or give pattern to a surface.
Burrs - Flame. Diamond Plated Stainless Steel. Size 5.0mm.
These small cutters have diamond abrasive plated onto a stainless steel 3/32" diameter shaft. The recommended speeds are 10,000 rpm for the cutting off wheels, 15,000 rpm for the larger burrs and up to 25,000 rpm for the smaller burrs. Use with water. Shank diameter- 2.34mm. total length- 45mm.Perfect for carving, grinding and engraving work on mild and hardened metals & alloys, precious metals, gemstones, glass, plastics and ceramics. Used in conjunction with a pendant drill, hobby drill, rotary tool or micromotor to cut or grind away, shape or give pattern to a surface.
Burrs - Split. Diamond Plated Stainless Steel. Size 2.2mm.
These small cutters have diamond abrasive plated onto a stainless steel 3/32" diameter shaft. The recommended speeds are 10,000 rpm for the cutting off wheels, 15,000 rpm for the larger burrs and up to 25,000 rpm for the smaller burrs. Use with water. Shank diameter- 2.34mm. total length- 45mm.Perfect for carving, grinding and engraving work on mild and hardened metals & alloys, precious metals, gemstones, glass, plastics and ceramics. Used in conjunction with a pendant drill, hobby drill, rotary tool or micromotor to cut or grind away, shape or give pattern to a surface.
Burrs - Split. Diamond Plated Stainless Steel. Size 4.7mm.
These small cutters have diamond abrasive plated onto a stainless steel 3/32" diameter shaft. The recommended speeds are 10,000 rpm for the cutting off wheels, 15,000 rpm for the larger burrs and up to 25,000 rpm for the smaller burrs. Use with water. Shank diameter- 2.34mm. total length- 45mm.Perfect for carving, grinding and engraving work on mild and hardened metals & alloys, precious metals, gemstones, glass, plastics and ceramics. Used in conjunction with a pendant drill, hobby drill, rotary tool or micromotor to cut or grind away, shape or give pattern to a surface.
Burrs - Split. Diamond Plated Stainless Steel. Size 13.5mm.
These small cutters have diamond abrasive plated onto a stainless steel 3/32" diameter shaft. The recommended speeds are 10,000 rpm for the cutting off wheels, 15,000 rpm for the larger burrs and up to 25,000 rpm for the smaller burrs. Use with water. Shank diameter- 2.34mm. total length- 45mm.Perfect for carving, grinding and engraving work on mild and hardened metals & alloys, precious metals, gemstones, glass, plastics and ceramics. Used in conjunction with a pendant drill, hobby drill, rotary tool or micromotor to cut or grind away, shape or give pattern to a surface.
Burrs - Inverted Cone. Diamond Plated Stainless Steel. Size 9.5mm.
These small cutters have diamond abrasive plated onto a stainless steel 3/32" diameter shaft. The recommended speeds are 10,000 rpm for the cutting off wheels, 15,000 rpm for the larger burrs and up to 25,000 rpm for the smaller burrs. Use with water. Shank diameter- 2.34mm. total length- 45mm.Perfect for carving, grinding and engraving work on mild and hardened metals & alloys, precious metals, gemstones, glass, plastics and ceramics. Used in conjunction with a pendant drill, hobby drill, rotary tool or micromotor to cut or grind away, shape or give pattern to a surface.
Burrs - Inverted Cone. Diamond Plated Stainless Steel. Size 7.7mm.
These small cutters have diamond abrasive plated onto a stainless steel 3/32" diameter shaft. The recommended speeds are 10,000 rpm for the cutting off wheels, 15,000 rpm for the larger burrs and up to 25,000 rpm for the smaller burrs. Use with water. Shank diameter- 2.34mm. total length- 45mm.Perfect for carving, grinding and engraving work on mild and hardened metals & alloys, precious metals, gemstones, glass, plastics and ceramics. Used in conjunction with a pendant drill, hobby drill, rotary tool or micromotor to cut or grind away, shape or give pattern to a surface.
Burrs - Inverted Cone. Diamond Plated Stainless Steel. Size 8mm
These small cutters have diamond abrasive plated onto a stainless steel 3/32" diameter shaft. The recommended speeds are 10,000 rpm for the cutting off wheels, 15,000 rpm for the larger burrs and up to 25,000 rpm for the smaller burrs. Use with water. Shank diameter- 2.34mm. total length- 45mm.Perfect for carving, grinding and engraving work on mild and hardened metals & alloys, precious metals, gemstones, glass, plastics and ceramics. Used in conjunction with a pendant drill, hobby drill, rotary tool or micromotor to cut or grind away, shape or give pattern to a surface.
Burrs - Inverted Cone. Diamond Plated Stainless Steel. Size 8mm
These small cutters have diamond abrasive plated onto a stainless steel 3/32" diameter shaft. The recommended speeds are 10,000 rpm for the cutting off wheels, 15,000 rpm for the larger burrs and up to 25,000 rpm for the smaller burrs. Use with water. Shank diameter- 2.34mm. total length- 45mm. Perfect for carving, grinding and engraving work on mild and hardened metals & alloys, precious metals, gemstones, glass, plastics and ceramics. Used in conjunction with a pendant drill, hobby drill, rotary tool or micromotor to cut or grind away, shape or give pattern to a surface.
36pc mounted stone kit. Includes cones, rounds, drums, and more. Used for deburring, grinding, and rough polishing.
This wooden burr stand holds eighty eight (88) diamond burrs. We have included a complete range of our current burrs in this stand. Shapes include; Cup, Bullet, Cylinder, Cutting Disc, Oval, Round, Bud, Sharp, Inverted Triangle, Trapezoid, Inverted Trapezoid, Tall Cylinder, Concave, Wheel and Torch.
All of the above diamond burrs are also available to buy as individual items. See listing of type, size we have available including prices
This small handy pack contains a variety of diamond burrs both in size and type. The types included in this pack are; Flame, Point, Ball, Cutting Disc, Torch, Bud, Cylinder, Sharp and Inverted Trapezoid.
Diamond Drill- Standard, 0.75mm
Bits have blocky diamond that is bonded to a flexible music wire providing a positive clearance (kerf); this allows for easy drilling without jamming. Suitable for gemstone, glass, ceramics and all other hard material.
Drills vary from 0.75mm to 2.5mm. Recommended speeds are from around 20,000 rpm for the smallest diamond drill, to about 5,000 rpm for the larger models. Drills should ideally be held in a small drill press to ensure that accurate alignment is maintained. Drilling should be such that the point of the drill is submerged in water. Very gentle pressure is all that is required.
To drill holes in small stones for pendants
Since it is easy to ruin a diamond bit with too much heat you must use light pressure and keep the stone wet by either dipping the stone in a bowl of water frequently or by mounting the stone in a small, shallow container of water with clay to hold it while drilling. To drill a hole in a stone, it is usually easier to use a small diamond burr to start the hole in the stone where you want to drill the hole, This makes a small indent so that it is easier to start the wire drill. Use the diamond drill with light pressure in up and down motions until you are through the rock. Use caution when you are about to go through the other side so that you don't chip the stone when it comes through the other side. Sometimes it is better to drill from the other side when you get close to coming out the other side.
Diamond Drill- Standard, 1.25mm Bits have blocky diamond that is bonded to a flexible music wire providing a positive clearance (kerf); this allows for easy drilling without jamming. Suitable for gemstone, glass, ceramics and all other hard material.
Drills vary from 0.75mm to 2.5mm. Recommended speeds are from around 20,000 rpm for the smallest diamond drill, to about 5,000 rpm for the larger models. Drills should ideally be held in a small drill press to ensure that accurate alignment is maintained. Drilling should be such that the point of the drill is submerged in water. Very gentle pressure is all that is required.
Diamond Drill- Standard, 1.5mm Bits have blocky diamond that is bonded to a flexible music wire providing a positive clearance (kerf); this allows for easy drilling without jamming. Suitable for gemstone, glass, ceramics and all other hard material.
Drills vary from 0.75mm to 2.5mm. Recommended speeds are from around 20,000 rpm for the smallest diamond drill, to about 5,000 rpm for the larger models. Drills should ideally be held in a small drill press to ensure that accurate alignment is maintained. Drilling should be such that the point of the drill is submerged in water. Very gentle pressure is all that is required.
Diamond Drill- Standard, 2.0mm Bits have blocky diamond that is bonded to a flexible music wire providing a positive clearance (kerf); this allows for easy drilling without jamming. Suitable for gemstone, glass, ceramics and all other hard material.
Drills vary from 0.75mm to 2.5mm. Recommended speeds are from around 20,000 rpm for the smallest diamond drill, to about 5,000 rpm for the larger models. Drills should ideally be held in a small drill press to ensure that accurate alignment is maintained. Drilling should be such that the point of the drill is submerged in water. Very gentle pressure is all that is required.
Diamond Drill- Standard, 2.5mm Bits have blocky diamond that is bonded to a flexible music wire providing a positive clearance (kerf); this allows for easy drilling without jamming. Suitable for gemstone, glass, ceramics and all other hard material.
Drills vary from 0.75mm to 2.5mm. Recommended speeds are from around 20,000 rpm for the smallest diamond drill, to about 5,000 rpm for the larger models. Drills should ideally be held in a small drill press to ensure that accurate alignment is maintained. Drilling should be such that the point of the drill is submerged in water. Very gentle pressure is all that is required.
Recommended RPM - 5,000 to 20,000.
Recommended RPM - 5,000 to 20,000.
Recommended RPM - 5,000 to 20,000.
Recommended RPM - 5,000 to 20,000.
Recommended RPM - 5,000 to 20,000.
